Compatibilité entre moteur et controleur ?
Posté : jeu. déc. 24, 2009 13:54 pm
Bonjour, est ce que le controleur Turnigy 60A peut s'accorder avec un moteur Velineon 380 ? Parcque j'ai griller un controleur velineon VXL 3m et je voudrais monter cette ensemble sur un mini inferno.Merci.
Spec.Controleur Turnigy 60A
Cont. Current: 60A
Burst Current: 380A
Resistance: 0.0007ohm
Car Size: 1/10
Suggested Motor: Around 5.5T / 3650kv
Battery: 2-3 Cell Lipo / 4-9 Cell Ni-XX
BEC: 6V/ 1.5A Output
Motor Type: Sensorless Brushless
Size: 31.5*27.5*24mm
Weight: 32g
Spec: Velineon 380
Can Length: 48.15mm (1.9")
Can Diameter: 28mm (1.1")
Shaft Length: 12.7mm (0.50")
Shaft Diameter: 3.15mm (0.12")
kV: 4000 (8-turn)
Current: 25A constant/ 50A burst
Max RPM: 50,000
Weight: 140g (4.94oz)
Spec.Controleur Turnigy 60A
Cont. Current: 60A
Burst Current: 380A
Resistance: 0.0007ohm
Car Size: 1/10
Suggested Motor: Around 5.5T / 3650kv
Battery: 2-3 Cell Lipo / 4-9 Cell Ni-XX
BEC: 6V/ 1.5A Output
Motor Type: Sensorless Brushless
Size: 31.5*27.5*24mm
Weight: 32g
Spec: Velineon 380
Can Length: 48.15mm (1.9")
Can Diameter: 28mm (1.1")
Shaft Length: 12.7mm (0.50")
Shaft Diameter: 3.15mm (0.12")
kV: 4000 (8-turn)
Current: 25A constant/ 50A burst
Max RPM: 50,000
Weight: 140g (4.94oz)